Natural Cedar Hexagon Raised Garden Beds

ITEM #: RBH
$39.95

Free Shipping ( Due to high demand, ship times may be up to 4 weeks Processing time varies: Learn more )

Width (W)
Length (L)
Height (H)
Current stock: 0

Made in the USA from kiln-dried Port Orford cedar, this hexagon-shaped raised bed makes an interesting shaped garden for growing vegetables, flowers, shrubs, or even trees.

Read more

Overview

Hexagon raised beds offer eye-catching shapes for growing flowers, herbs and vegetables in container gardens. They are available in regular (all sides equal) and elongated, or boat-shaped, varieties. Hexagon planters can be used alone or arranged together in honeycomb-like patterns, to create attractive and accessible garden designs.

Made in the USA from Oregon grown Port Orford cedar - the strongest of all cedars - as strong as Douglas fir and more rot-resistant than redwood. These raised beds are sturdy and easy to assemble. Simply position boards so the ends overlap and insert metal corner pins to lock the boards together. It is easy to stack additional boards to increase the height of the garden.

Features & Benefits:

  • Hexagon shaped raised garden bed
  • Assembles in minutes, no tools required
  • Durable Port Orford cedar protected by a non-toxic waterproof sealant
  • Superior strength stainless steel corner pin construction
  • Made in the USA

Optional Trim

Because they make use of shorter length boards, hexagon and octagon raised beds are more affordably priced than similar size rectangle beds. The rounded-end side boards pivot on the corner pins, and can be adjusted to form wider or narrower raised beds.

The Natural Cedar Hexagon Raised Garden Bed can be equipped with optional top rails for an attractive finish and increased stability. The trim consists of pre-drilled 3-1/4 inch wide top rails that attach to the raised bed with included screws.

Please note the duration of the warranty is 5 years for raised beds without trim packs, and 10 years for raised beds with installed trim packs.

Dimensions

The raised bed’s side boards are standard surfaced 5/4 x 6 lumber with actual dimensions of 1 1/16" x 5 1/2". Two boards stacked give the raised beds a height of 11 inches. Three boards stacked make a 16.5 inch raised bed, and four boards stacked make a 22 inch raised bed. Raised beds can be stacked as high as 33 inches.

Each size comes with corner pins the same height as the bed you order, so you can put the raised bed on hard ground or a patio if needed, and the tops of the pins will be flush with the top of the bed.

Durable Cedar

These raised beds are made from kiln-dried Port Orford cedar—the strongest of all cedars. It is a fragrant, light-colored wood with even texture and strong natural oils to protect against moisture and fungal decay.

To enhance the cedar's natural rot resistance, the boards are treated with a non-toxic silica-based wood stabilizer, which hardens the wood and further extends its lifespan. This cedar long outlasts most lumber found in stores. Perfect for long-lasting raised beds!

Innovative Design

The simple design of these kits allows wood to shrink and swell, for better strength and durability in wet and dry conditions. Hardware like screws and nails eventually loosen as wood ages. Our raised beds assemble with rust-proof steel rods set securely through the ends of each board. So after years of exposure the raised bed won't fall apart, and yet it can be disassembled by hand if needed.

Setup & Assembly

Hexagon raised beds can be set up on any ground surface that is flat and level. Simply position the boards so the notched ends overlap and insert corner pins to lock the boards together. Stack additional board layers to build the height of the raised bed. The corner pins will be the same height as the bed you order.

No tools are required to assemble the basic raised beds. Optional trim packs attach to the raised beds with included screws, so a power screwdriver is recommended. Assembly instructions are included.

Update to our assembly video: As of February 2020, our Natural Cedar raised garden beds are made from 1-1/16" thick Port Orford Cedar - a stronger, denser and more rot-resistant wood. All of the hardware is now stainless steel. We are no longer using 1-1/2" thick boards and aluminum hardware, as stated in the video.

Overview

Made in the USA from kiln-dried Port Orford cedar, this hexagon-shaped raised bed makes an interesting shaped garden for growing vegetables, flowers, shrubs, or even trees.

Read more

Overview

Hexagon raised beds offer eye-catching shapes for growing flowers, herbs and vegetables in container gardens. They are available in regular (all sides equal) and elongated, or boat-shaped, varieties. Hexagon planters can be used alone or arranged together in honeycomb-like patterns, to create attractive and accessible garden designs.

Made in the USA from Oregon grown Port Orford cedar - the strongest of all cedars - as strong as Douglas fir and more rot-resistant than redwood. These raised beds are sturdy and easy to assemble. Simply position boards so the ends overlap and insert metal corner pins to lock the boards together. It is easy to stack additional boards to increase the height of the garden.

Features & Benefits:

  • Hexagon shaped raised garden bed
  • Assembles in minutes, no tools required
  • Durable Port Orford cedar protected by a non-toxic waterproof sealant
  • Superior strength stainless steel corner pin construction
  • Made in the USA

Optional Trim

Because they make use of shorter length boards, hexagon and octagon raised beds are more affordably priced than similar size rectangle beds. The rounded-end side boards pivot on the corner pins, and can be adjusted to form wider or narrower raised beds.

The Natural Cedar Hexagon Raised Garden Bed can be equipped with optional top rails for an attractive finish and increased stability. The trim consists of pre-drilled 3-1/4 inch wide top rails that attach to the raised bed with included screws.

Please note the duration of the warranty is 5 years for raised beds without trim packs, and 10 years for raised beds with installed trim packs.

Dimensions

The raised bed’s side boards are standard surfaced 5/4 x 6 lumber with actual dimensions of 1 1/16" x 5 1/2". Two boards stacked give the raised beds a height of 11 inches. Three boards stacked make a 16.5 inch raised bed, and four boards stacked make a 22 inch raised bed. Raised beds can be stacked as high as 33 inches.

Each size comes with corner pins the same height as the bed you order, so you can put the raised bed on hard ground or a patio if needed, and the tops of the pins will be flush with the top of the bed.

Durable Cedar

These raised beds are made from kiln-dried Port Orford cedar—the strongest of all cedars. It is a fragrant, light-colored wood with even texture and strong natural oils to protect against moisture and fungal decay.

To enhance the cedar's natural rot resistance, the boards are treated with a non-toxic silica-based wood stabilizer, which hardens the wood and further extends its lifespan. This cedar long outlasts most lumber found in stores. Perfect for long-lasting raised beds!

Innovative Design

The simple design of these kits allows wood to shrink and swell, for better strength and durability in wet and dry conditions. Hardware like screws and nails eventually loosen as wood ages. Our raised beds assemble with rust-proof steel rods set securely through the ends of each board. So after years of exposure the raised bed won't fall apart, and yet it can be disassembled by hand if needed.

Setup & Assembly

Hexagon raised beds can be set up on any ground surface that is flat and level. Simply position the boards so the notched ends overlap and insert corner pins to lock the boards together. Stack additional board layers to build the height of the raised bed. The corner pins will be the same height as the bed you order.

No tools are required to assemble the basic raised beds. Optional trim packs attach to the raised beds with included screws, so a power screwdriver is recommended. Assembly instructions are included.

Update to our assembly video: As of February 2020, our Natural Cedar raised garden beds are made from 1-1/16" thick Port Orford Cedar - a stronger, denser and more rot-resistant wood. All of the hardware is now stainless steel. We are no longer using 1-1/2" thick boards and aluminum hardware, as stated in the video.

Specifications
Key Feature:
Hexagon-shaped raised garden bed
Material:
Port Orford Cedar
Board Thickness:
1 1/16"
Origin:
Made in the U.S.A.
Lead Time:
Due to high demand, ship times may be up to 4 weeks
Warranty:
10 Year Limited Warranty for Raised Beds With Trim Packs; 5 Year Limited Warranty for Raised Beds Without Trim Packs
Shipping
Why Buy From Us
  • No-hassle, 30 day returns
  • No sales tax
  • Quick shipping
  • Secure shopping (SSL, PCI, McAfee Secure)
  • In business since 2000
  • Member of Better Business Bureau, Green America, and US EPA Watersense
  • Carbon-neutral, Family-owned business that promotes sustainability!

Made in the USA from kiln-dried Port Orford cedar, this hexagon-shaped raised bed makes an interesting shaped garden for growing vegetables, flowers, shrubs, or even trees.

Read more

Overview

Hexagon raised beds offer eye-catching shapes for growing flowers, herbs and vegetables in container gardens. They are available in regular (all sides equal) and elongated, or boat-shaped, varieties. Hexagon planters can be used alone or arranged together in honeycomb-like patterns, to create attractive and accessible garden designs.

Made in the USA from Oregon grown Port Orford cedar - the strongest of all cedars - as strong as Douglas fir and more rot-resistant than redwood. These raised beds are sturdy and easy to assemble. Simply position boards so the ends overlap and insert metal corner pins to lock the boards together. It is easy to stack additional boards to increase the height of the garden.

Features & Benefits:

  • Hexagon shaped raised garden bed
  • Assembles in minutes, no tools required
  • Durable Port Orford cedar protected by a non-toxic waterproof sealant
  • Superior strength stainless steel corner pin construction
  • Made in the USA

Optional Trim

Because they make use of shorter length boards, hexagon and octagon raised beds are more affordably priced than similar size rectangle beds. The rounded-end side boards pivot on the corner pins, and can be adjusted to form wider or narrower raised beds.

The Natural Cedar Hexagon Raised Garden Bed can be equipped with optional top rails for an attractive finish and increased stability. The trim consists of pre-drilled 3-1/4 inch wide top rails that attach to the raised bed with included screws.

Please note the duration of the warranty is 5 years for raised beds without trim packs, and 10 years for raised beds with installed trim packs.

Dimensions

The raised bed’s side boards are standard surfaced 5/4 x 6 lumber with actual dimensions of 1 1/16" x 5 1/2". Two boards stacked give the raised beds a height of 11 inches. Three boards stacked make a 16.5 inch raised bed, and four boards stacked make a 22 inch raised bed. Raised beds can be stacked as high as 33 inches.

Each size comes with corner pins the same height as the bed you order, so you can put the raised bed on hard ground or a patio if needed, and the tops of the pins will be flush with the top of the bed.

Durable Cedar

These raised beds are made from kiln-dried Port Orford cedar—the strongest of all cedars. It is a fragrant, light-colored wood with even texture and strong natural oils to protect against moisture and fungal decay.

To enhance the cedar's natural rot resistance, the boards are treated with a non-toxic silica-based wood stabilizer, which hardens the wood and further extends its lifespan. This cedar long outlasts most lumber found in stores. Perfect for long-lasting raised beds!

Innovative Design

The simple design of these kits allows wood to shrink and swell, for better strength and durability in wet and dry conditions. Hardware like screws and nails eventually loosen as wood ages. Our raised beds assemble with rust-proof steel rods set securely through the ends of each board. So after years of exposure the raised bed won't fall apart, and yet it can be disassembled by hand if needed.

Setup & Assembly

Hexagon raised beds can be set up on any ground surface that is flat and level. Simply position the boards so the notched ends overlap and insert corner pins to lock the boards together. Stack additional board layers to build the height of the raised bed. The corner pins will be the same height as the bed you order.

No tools are required to assemble the basic raised beds. Optional trim packs attach to the raised beds with included screws, so a power screwdriver is recommended. Assembly instructions are included.

Update to our assembly video: As of February 2020, our Natural Cedar raised garden beds are made from 1-1/16" thick Port Orford Cedar - a stronger, denser and more rot-resistant wood. All of the hardware is now stainless steel. We are no longer using 1-1/2" thick boards and aluminum hardware, as stated in the video.

Key Feature:
Hexagon-shaped raised garden bed
Material:
Port Orford Cedar
Board Thickness:
1 1/16"
Origin:
Made in the U.S.A.
Lead Time:
Due to high demand, ship times may be up to 4 weeks
Warranty:
10 Year Limited Warranty for Raised Beds With Trim Packs; 5 Year Limited Warranty for Raised Beds Without Trim Packs
  • No-hassle, 30 day returns
  • No sales tax
  • Quick shipping
  • Secure shopping (SSL, PCI, McAfee Secure)
  • In business since 2000
  • Member of Better Business Bureau, Green America, and US EPA Watersense
  • Carbon-neutral, Family-owned business that promotes sustainability!

Product Videos

Specifications:

Key Feature:
Hexagon-shaped raised garden bed
Material:
Port Orford Cedar
Board Thickness:
1 1/16"
Origin:
Made in the U.S.A.
Lead Time:
Due to high demand, ship times may be up to 4 weeks
Warranty:
10 Year Limited Warranty for Raised Beds With Trim Packs; 5 Year Limited Warranty for Raised Beds Without Trim Packs

What our customers are saying