About Accu Brand
Accu Brand makes hose hangers built to last. Every Accu-Brand hose hanger is made in the USA from 304 stainless steel, so it won't bend, break, or rust. These aren't flimsy reels or plastic hooks that crack after one winter. They're heavy-duty, industrial-grade brackets engineered to mount on a wall and hold a fully loaded garden hose for years, rain or shine.
The whole line is built around the Dura-Loop design. The same hardware that keeps a garden hose tidy in the backyard is rated to hold up to 200 lbs, which is why Dura-Loop hangers are equally at home in workshops, garages, and marine settings storing extension cords, air lines, and heavy industrial hose.
Stainless Steel Hose Hangers Built to Outlast the Hose
Most hose holders are sized for the hardware store, not for the job. Accu Brand goes the other way. Because the entire bracket is solid 304 stainless steel, it won't rust, won't corrode in salt air, and won't sag under a heavy commercial hose the way powder-coated steel or plastic does. Mount it once and forget it. For anyone who has gone through three cheap hangers in three seasons, a single Accu Brand hanger ends the cycle for good.
Choose the Dura-Loop That Fits Your Space
EarthEasy carries three core Accu Brand models, so you can match the hanger to how much hose you're storing and where you're mounting it.
Dura-Loop Hook (Hanger): The classic wall-mounted hose hanger. Available in two sizes; the smaller holds up to 100 ft of 1/2" hose and the larger holds up to 100 ft of 3/4" hose, both rated to 200 lbs. The simplest, most affordable way to get a garden or shop hose off the ground, and well suited to extension cords too. Mounting hardware is included.
Dura-Loop Saddle (Rack): A wider, saddle-style stainless steel hose rack large enough to hold up to 100 ft of 1-1/4" (outside diameter) heavy-duty hose. The go-to pick for a full-length or thicker garden hose by the spigot. Mounting hardware is included.
Dura-Loop Tilt (Holder): Accu Brand's adjustable model. The wall-mount bracket tilts to three positions (upright, 45°, and down) and pivots 60 degrees side to side, so you can angle it for easier coiling and removal. It holds up to 100 ft of 3/4" hose. Mounting hardware is included.
Each model installs with the included hardware and is suited to residential, commercial, and marine use.
Why Customers Choose Accu Brand Hose Hangers
304 stainless steel: Rust-proof and corrosion-resistant, even in salt air.
Made in the U.S.A.: Every hanger is manufactured in the United States.
Heavy-duty Dura-Loop design: Rated to hold up to 200 lbs and store up to 100 ft of hose.
Won't bend, break, or rust: Solid stainless construction means nothing to repaint and nothing to replace.
Mounting hardware included: Every model ships ready to install on a wall.
Built for any setting: At home in residential, commercial, industrial, and marine applications.
If you're looking for a heavy duty hose hanger that you install once and never think about again, Accu Brand is the answer.
Frequently Asked Questions
What does Accu Brand make?
Accu Brand makes heavy-duty stainless steel hose hangers — a wall-mounted hook, a saddle-style rack, and an adjustable tilt holder, all built around the Dura-Loop design. The same hardware also stores extension cords, air hoses, and cable in garages, workshops, and marine settings.
Are Accu Brand hose hangers made in the USA?
Yes. Every Accu Brand hose hanger is made in the USA from 304 stainless steel.
How much weight can an Accu Brand Dura-Loop hose hanger hold?
The Dura-Loop hangers are rated to hold up to 200 lbs and can store up to 100 ft of hose without bending, breaking, or rusting.
Will an Accu Brand hose hanger rust?
No. Because the entire bracket is solid 304 stainless steel, it resists rust and corrosion even in wet, coastal, or salt-air environments, making it a durable outdoor-rated hose holder.
Which Accu Brand model should I choose?
For a standard garden hose, the Dura-Loop Hook or the Dura-Loop Saddle rack works well; the Saddle handles thicker, up to 1-1/4" hose. If you want to angle the bracket for easier coiling, choose the Dura-Loop Tilt, which adjusts to three positions and pivots side to side.
